Leading 10 common forklift accidents ， forklift operation ought to take note of these matters ！.
Leading 10 common forklift accidents ， forklift operation ought to take note of these matters ！.
Blog Article
Do not undervalue the forklift at the office. If the procedure is not good, there will be major mishaps in mins, and there are lots of accidents including forklifts.
Situation 1: The forklift cargo obstructed the vehicle driver's sight, and the individual ahead can not be found, causing a rolling mishap.
Situation 2: In order to maintain the balance of the forklift when lifting heavy products, the staff members used their body weight as the counterweight, which practically triggered casualties.
Situation 3: The width of the forklift cargo goes beyond the allowable width of the path and holds on the roadside rack, which virtually causes an crash.
Situation 4: Forklift is speeding up and surrender during a turn.
Instance 5: The forklift chauffeur did not observe the pedestrian, and the pedestrian did not discover the forklift.
Instance 6: The forklift lifts the personnel illegally, the forklift driver does not put on the seat belt, the forklift lifter drops and the chauffeur is crushed when the forklift rolls over.
Case 7: The forklift driver did not put on a safety belt and dropped from the car when it rolled over and was crushed.
Forklift operation need to take notice of these matters ：.
Start.
1. Prior to starting, observe the surroundings, and after confirming that there are no obstacles that prevent the safety of driving, honk the horn first and then begin.
2. For automobiles with hydraulic (air pressure) brakes, the brake hydraulic pressure (air pressure) scale need to be secure before beginning.
3. When the forklift starts with a tons, the driver must first verify that the load is secure and trusted.
4. The start needs to be slow-moving and steady.
Driving.
1. When driving, the elevation in between the bottom end of the fork and the ground should be maintained 300mm-400mm, and the pole should be slanted in reverse. .
2. Do not lift the fork too high when driving. When getting in and leaving the work site or while driving, be careful that there will certainly be no challenges in the sky. When the lots is traveling, the fork should not be increased too expensive, which will influence the stability of the forklift. .
3. After dumping, the fork should be lowered to the normal driving setting before driving. .
4. When turning, if there are pedestrians or cars nearby, the driving signal should be issued first. High-speed doglegs are banned. High-speed doglegs will certainly trigger the car to lose side security and tip over. .
5. When the forklift is downhill, it is strictly forbidden to switch off the fire and slide, and it is prohibited to brake unexpectedly while driving with lots unless there are special conditions.
6. When the forklift is running, it has to follow the traffic rules in the factory and have to keep a certain safety range from the lorry ahead. .
7. When the forklift is running, the lots should be in the lowest placement that does not prevent the driving, and the gantry must be correctly tilted back. The lots will not be raised except when piling or filling. .
8. The elevation of the lots need to not block the motorist's sight. In unique circumstances, when the product impacts the forward vision, drive at a reduced rate when turning around.
9. It is forbidden to switch on the ramp, neither to drive throughout the ramp. .
10. The secure driving rate of the forklift in the manufacturing facility area is 5 km/h, and it needs to drive securely at a reduced rate when going into the production workshop location. .
11. When the forklift is raised, lifted or driven, it is prohibited for workers to base on the fork to hold items and play a balancing role. .
12. If problems are found, they will be repaired and reported in a timely way, and they will never operate with ailments or conceal them.
filling and dumping.
1. When fork-loading products, the range in between both forks must be adjusted as needed to make the load of the two forks balanced and not manipulated, and one side of the product need to be against the shelf. .
2. It is restricted to deal with a solitary fork or utilize a fork top or draw. In special scenarios, safety warning signs have to be established to advise bordering pedestrians. .
3. In the process of loading and unloading things, the forklift has to be braked with the brake. .
4. The speed of the automobile should be slow and steady. Take care not to roll the wheels on the dunnage, so as not to extend the rolled objects and hurt people. .
5. When using a fork to fork the goods, the fork ought to be as deep as possible under the tons, and it must be kept in mind that the fork tip must not touch other goods or things. The tons ought to be stabilized with very little back tilt of the gantry to make sure that the lots does not glide backwards. The pole can be tilted forward a little when the lots is decreased to enable easy positioning of the lots and extraction of the forks. .
6. It is prohibited to fork items at high speed and hit tough items with the fork head. .
7. When the forklift is working, it is restricted for individuals to loaf the fork, so as to avoid the collapse of the goods and injure people. .
8. Overwhelming is prohibited, and it is banned to use forks to lift workers to take part in high-altitude operations to prevent high-altitude dropping crashes. .
9. It is not allowed to make use of the brake inertia to slip, put, round or roll Electric Forklift Truck for Warehouse things. .
10. It is not permitted to utilize forks to pick, transform pallet discharge.
Leaving .
1. It is restricted to leave the forklift when the things on the fork impend. Before leaving the forklift, you must dump the goods or reduced the fork framework.
2. Pull the hand brake take care of to dead or depress the parking brake button.
3. The engine is switched off and the power is cut off. (Except for unique conditions, such as the driver does not leave the automobile's view and does not surpass 1 min).
4. Eliminate the key. .
Forklift Operation Precautions.
1. Before and after the forklift procedure, the appearance must be checked, and fuel, lubing oil and cooling water must be added.
2. Inspect the safety performance of starting, running and braking.
3. Inspect whether the lights and horn signals are full and effective.
4. Throughout the procedure of the forklift, inspect whether the stress and temperature are normal.
5. After the forklift is running, the external leak must likewise be checked and the seals need to be changed in time.
Forklift Safety Operation Specifications.
1. You should check prior to leaving the auto;.
2. When you come across somebody before you throughout driving, you ought Stand-on Electric Pallet Stacker to send out a signal at a distance of 5 m;.
3. The driving rate in the factory does not go beyond 5 km/h;.
4. When driving, the low point of the freight must be 0.3 m ~ 0.4 m above the ground;.
5. The transforming ought to not be too sharp to avoid the tendency of " cost-free turning";.
6. Adding and down the slope should be sluggish and uniform, and no activating the slope is permitted.
7. Do not drive across the slope. When the gradient is above 10%, the car needs to be driven backwards when worsening;.
8. When the forklift personnel lug the goods and move forward, if they run into large or hefty goods and go to the vehicle driver's line of vision, they need to take the reversing workout
.
The "Eight Prohibitions" need to be complied with in the procedure.
1. Single fork operation is not allowed.
2. It is not permitted to lift the goods for long distance driving.
3. It is not permitted to get the goods by handing over the pallet with the fork.
4. It is not permitted to straight shovel chemicals, flammables and other unsafe chemicals with forks.
5. It is not allowed to utilize inertia pressure to grab the goods.
6. It is not allowed to utilize stopping pressure to exile round or easy-to-roll items.
7. It is not enabled to bring individuals to work on the pallet or fork, and it is strictly prohibited to stand under the fork after the fork is elevated.
8. Do not drive side to side on inclines
.
Auto parking is not allowed under the list below problems.
1. Curves, narrow roads, railway crossings;.
2. Sections with a longitudinal slope above 5%.
3. When there is an barrier on one side of the roadway, the contrary side of the section with the same length as the obstacle ought to be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844